DMIT Client Portal
Assessments
Everyone you have assessed on this licence.
Assessments
0
Waiting for scan
0
Waiting for analysis
0
Reports made
0
| Client | Reference | Parent | Updated | Stage |
|---|
No assessments yet. Click New assessment to start.
New assessment
Step 1Client details
Step 2Scan fingers
Step 3Analyse patterns
Step 4Report
Client information
Fields marked * are needed. The name appears on the report.
For the report
Photo
Optional. Shown on the client record.
No photo
—
—
Connect the scanner to begin
Press the finger flat and roll slightly to the side being captured.
This finger
Click a picture to take it again.
0 of 30 pictures
Pattern and ridge count
For each finger, look at the three pictures, choose the pattern and enter the ridge count from core to delta. Arches have no delta — leave their count at 0. Click any picture to enlarge it.
Scanner setup
Do this once on each Windows computer that has a fingerprint scanner. It takes about five minutes.
- Install the scanner driver. Plug in the scanner. If Windows does not recognise it, install the driver.
- Install the Microsoft runtime (Visual C++ 2005 SP1, x86). The scanner's own software needs it. Most computers already have it — install it only if the test below fails.
- Install the BEL Scanner Bridge. Unzip it and double-click Install.bat. A BEL icon appears next to the clock and starts with Windows from now on.
- Test below. If Chrome or Edge asks to "access other apps and services on this device" or "devices on your local network", click Allow.
Windows 10 or 11 is recommended. Use Google Chrome or Microsoft Edge.
Test the scanner
Checks that the bridge is running and the scanner answers.